Flux RMA-223

Flux Soldering acid

Flux Soldering Acid (FCC Fluoride)
Flux soldering. It is used for soldering carbon steels, copper, nickel, bronze, steel and their alloys with low-melting solders at a temperature of 150-320C

Efficient foam for cleaning all glass surfaces 

Graphite Grease- the product has excellent lubricating qualities and is provides an effective anticorrosive protection. The addition of graphite increases its resistance to burdens and the action of cold water.

Graphite Grease- the product has excellent lubricating qualities and is provides an effective anticorrosive protection. The addition of graphite increases its resistance to burdens and the action of cold water.

This product is designed for repairing graphite-coated boards, such as those in remote controls and calculators. It is also suitable for shorting bridges and repairing broken traces. The kit contains two vials (graphite varnish and solvent).

  HEAT SINK COMPOUND (WHITE) 
0.5 g compound 

  HEAT SINK COMPOUND (WHITE) 
1g compound 

  HEAT SINK COMPOUND (WHITE) 
7g compound 

The paste facilitates heat flow between the electronic components and the heat sink. It is necessary for the proper operation of all types of temperature sensors, protects against atmospheric influences and prevents punctures. It is characterized by very good chemical resistance to oxidation; action of aqueous solutions of acids, bases and salts; sulfur dioxide and ammonia. It has a wide operating temperature range: from -50°C to 200°C.

AG Extreme enables excellent heat conduction between components such as the CPU, GPU, heat sink and fan.
The application method ensures simplicity of use, and the product can be easily applied to various elements of computer equipment and LED diodes

AG Extreme enables excellent heat conduction between components such as the CPU, GPU, heat sink and fan.
The application method ensures simplicity of use, and the product can be easily applied to various elements of computer equipment and LED diodes

AG Gold is a high-quality thermal paste. Due to its 45% gold content, its thermal conductivity is 3 times higher than that of normal thermally conductive pastes. This allows the CPU temperature to drop by about 6 degrees, even without changing the heat sink. The paste is the best alternative for overclockers. The product complies with the ROHS / Hazardous Substances Directive.

AG Gold is a high-quality thermal paste. Due to its 45% gold content, its thermal conductivity is 3 times higher than that of normal thermally conductive pastes. This allows the CPU temperature to drop by about 6 degrees, even without changing the heat sink. The paste is the best alternative for overclockers. The product complies with the ROHS / Hazardous Substances Directive.

AG Silver is a thermal paste with the addition of silver compounds. The thermal conductivity is much higher than that of typical carbon-silicon compounds. The product complies with the ROHS directive.

AG Silver is a thermal paste with the addition of silver compounds. The thermal conductivity is much higher than that of typical carbon-silicon compounds. The product complies with the ROHS directive.

AG THERMALLY CONDUCTIVE SILICONE PASTE HP 100g

HP THERMAL CONDUCTIVE PASTE necessary for the proper operation of all types of temperature sensors. Protects against atmospheric influences and prevents punctures. It is characterized by very good chemical resistance to oxidation, aqueous solutions, acids, alkalis, salts, sulfur dioxide and ammonia. It has a wide operating temperature range.

THERMAL CONDUCTIVE PASTE HPX 100G SILICONE AG THERMOPASTAS

HPX thermal paste with a thermal conductivity coefficient of >2.8W/mK, which does not conduct electricity. It is necessary for the proper operation of all types of temperature sensors. The low thermal impedance of the paste allows it to maintain constant effectiveness at temperatures from -50 to 250 °C.

HY-410 Thermal Paste – Effective Heat Dissipation for Processors and Graphics Cards
HY-410 is a high-quality silver oxide-based thermal paste designed to provide stable cooling for processors, graphics cards, chipsets, and other hot components. It ensures reliable contact between the heatsink surface and the die, reducing temperatures and increasing system performance.
This thermal paste offers the optimal balance of price and performance. It ensures stable cooling, reduces component temperatures, and helps extend the lifespan of your hardware. An excellent choice for both home users and PC builders.

Cleanser IPA 1L.

All-purpose cleaning product in: electronics, precision mechanics and optics. It improves parameters and reliability of electric and electronic equipment working. High quality isopropanol.

Insulation tape ELEKTRIX 202 (19mmx20m, black)

Kontakt PR, a special preparation for regenerating potentiometers, perfectly suitable for removing any dirt deposited during device operation, contains a special grease to reduce friction.

Kontakt PR, a special preparation for regenerating potentiometers, perfectly suitable for removing any dirt deposited during device operation, contains a special grease to reduce friction.

LCD screen cleaning kit

Antistatic foam with nanoparticles for cleaning plasma and LCD screens. The latest global nanotechnology used allows for even easier removal of all kinds of dirt and protects the screen ten times longer against dust. Nanoparticles extend the spectrum of the active surface of the cleaning agent, which significantly increases its efficiency.

BEST BST-328 solder paste 40g original Sn63 / Pb37 (with lead content) , used for soldering small and hard-to-reach SMD components and replacing balls on BGA systems. Especially recommended and often used for GSM applications. It is used for BGAP screens, thanks to which we obtain the desired mapping of soldering fields to BGA circuits in GSM applications. The paste is also very well suited for precoating BGA pads with lead tin.

BST-506 is a high-quality tin-lead solder paste designed for soldering SMD and BGA components. It is widely used in repairing mobile phones, laptops, home appliances and other digital devices.

BST-506-JP is a high-quality tin-lead solder paste designed for soldering SMD and BGA components. It is widely used in repairing mobile phones, laptops, home appliances and other digital devices.

Solder paste is an alloy or pure metal which, when heated, liquefies and melts to flow onto the space between two close fitting parts, creating a soldered joint.

Solder paste is an alloy or pure metal which, when heated, liquefies and melts to flow onto the space between two close fitting parts, creating a soldered joint.

Solder paste is an alloy or pure metal which, when heated, liquefies and melts to flow onto the space between two close fitting parts, creating a soldered joint.

Paste intended for soldering SMD components in production processes that do not include washing phases. Based on a No Clean type flux, it does not require washing, the residues of which do not cause corrosion centers. The product works with all lead-free alloys, it is characterized by good adhesiveness and wettability of the brazed surface. It does not lose its physical and chemical properties even after being left on the PCB for 20 hours. This time depends on the prevailing conditions in the room: humidity and temperature.

FLUID MACHINE OIL 65ml. AG AG MACHINE OIL AGT-080
The product is contained in an oil can with a capacity of 65 ml.

Etching agent for printed circuit boards and copper. The perfect alternative to iron chloride. The agent dissolves very quickly and does not crystallize out of the solution. It etches evenly, ensuring the sharpness of contours and minimizing undercutting.

Penetrating and lubricating preparation 100ml

Preparation for the protection and improvement of shock absorbers. Extends their service life, cleans and maintains them, adds smoothness to work. It has anti-corrosive properties. Leaves a transparent, thin protective layer, prevents dirt and grease from accumulating. It does not contain silicone, Teflon, graphite. It displaces water well and reduces friction, causing the performance of even a very old and neglected shock absorber to improve significantly within moments of application.

Contact cleaner, removes oxide, sulfide, dirt, oil and resin. Non-conductive. Especially for fitted contacts. Application: Television and video sets, telephone, electronics, office machinery.
Contents: 400

Contact cleaner, removes oxide, sulfide, dirt, oil and resin. Non-conductive. Especially for fitted contacts. Application: Television and video sets, telephone, electronics, office machinery.
Contents: 220 ml (gross) - 165 ml (net)

Contact cleaner, removes oxide, sulfide, dirt, oil and resin. Non-conductive. Especially for fitted contacts. Application: Television and video sets, telephone, electronics, office machinery.
Contents: 60ml

Contact cleaner, removes oxide, sulfide, dirt, oil and resin. Non-conductive. Especially for fitted contacts. Application: Television and video sets, telephone, electronics, office machinery.
Contents: - 500 ml (net)