KEMOT prosinus-300 pure sine wave backup power supply with charging function.
It is designed to supply AC loads with a nominal voltage of 230 VAC and a power of 300 W, for example:
Central heating pumps
Induction pumps
Fireplace pumps
Automation for thermal convectors
Other devices up to 300W
Thanks to the pure sinusoidal output voltage (load supply), the device ensures stable operation without overheating even when supplying inductive loads such as pumps or fans. Using a 12V battery, it provides full uninterrupted 230V AC power. It contains a battery protection system against overload, short circuit, overvoltage and overheating.
The device can operate in three modes:
Emergency power supply with charging function - converts the 12V DC voltage from an external battery into 230V AC and charges the external battery at the same time.
As a rectifier - charges an external battery (the device must be connected to AC 230V)
As a converter - converts 12V DC from an external battery to 230V AC.
The device is equipped with a clear and transparent LED display with current status indicators.
- Power supplies
- Input voltage
- Output voltage and frequency
- Load level
- Battery level
Specification:
Rated power: 300W
Battery type: 12V DC
Maximum battery voltage: 15V DC
Input voltage range: 180 - 275V AC
Input frequency: 45 - 60 Hz
Output voltage range: 230 V AC +/- 8%
Output frequency: 50 / 60Hz +/- 0.5 Hz
Output voltage shape: pure sine wave
Output efficiency:> = 85% (DC to AC)
Battery charging: max. 10A
Switching time: <= 4ms="" br="">Protection: against overload, short circuit, overvoltage, too high and low voltage.
Operating temperature: 0 - 40 ° C
Operating humidity: 10 - 90%
Weight: 4.7 kg
Dimensions: 25.5x26x16 cm
